Bush CHT101DVD, Быстрая настройка, Страница: 12 / 23

10
Electrical connection
Installation
Any electrical work that is required to
install this appliance MUST be carried out
E\DTXDOL¿HGHOHFWULFLDQ
Before making any electrical connections,
ensure the following:
‡ Do not bend, stretch or pull the supply cable in
order to avoid electric shock.
‡ The supply voltage should be the same as that
LQGLFDWHGLQWKHWHFKQLFDOVSHFL¿FDWLRQVDQGWKH
appliance rating plate.
‡ When installed, the power socket must be
within easy reach.
‡ If the socket outlets in your home are not
suitable for the plug supplied with this
XQLWFKHFNZLWKDTXDOL¿HGHOHFWULFLDQIRU
replacement.
‡
The use of multiple connectors or extension
cables are not recommended.
‡ The appliance must be connected to a 220-240
volt 50Hz AC supply by means of a three pin
socket.
‡
The main plug is used as the disconnect
device, the disconnect device shall remain
readily operable.
‡
In order to disconnect the apparatus from the
mains completely, the mains plug should be
disconnected from the mains socket outlet
completely.
Plug replacement (UK & Ireland only)
Should you need to replace the plug; the wires in
the power cable are coloured in the following way:
Blue – Neutral ‘N’
Brown – Live ‘L’
As the colours of the wires in the power cable
may not correspond with the coloured markings
identifying the terminals in your plug, and proceed
as follows:
The blue wire must be connected to the terminal
that is marked with the letter N.
The brown wire must be connected to the terminal
that is marked with the letter L.
If power supply cord is damaged, it must replaced
by the manufacturer or its service agent or a similar
TXDOL¿HGSHUVRQLQRUGHUWRDYRLGDKD]DUG
E
L
N
BLUE TO
NEUTRAL
BROWN
TO LIVE
CORD
GRIP
FUSE