Bush CBAR2, Инструкция по эксплуатации

Страница: 9 / 12

Page 8
Wall mounting the sound bar
1:
Align the Sound bar in the
chosen location . Use a
pencil to mark the drilling
positions
533
mm
(21”)
apart .
NOTE: The Sound bar should be located at least
75mm (3”) below the bottom of the TV .
3 inches (7.5 cm) or more
TV
SOURCE
+
2:
Drill holes as marked in
step 1 .
3: Insert 2 screws (not
supplied)
into the holes
and tighten . Take care to
leave
5
mm between the
screw heads and the wall .
NOTE: You will need to ensure the screws are long
enough to sufficiently grip the wall while allowing
5mm between screw head & wall .
4: Hook the Sound bar into the screws . For secure
mounting ensure the screw heads slide firmly into the
narrow part of the brackets .
Wall mounting advice
• In order to avoid damage to the equipment and
personal injury you should get a qualified person to
drill the fixing surface and fit the appropriate wall
fixings .
• Take care not to allow the main unit to fall while
attempting to hook onto the wall mount brackets .
• Before mounting, check the wall strength, if it is not
clear then consult relevant qualified personnel .
• When drilling into walls, always check that there are no
hidden wires or pipes etc .
• Make sure the screws & wall plugs are suitable for
supporting the unit .
533mm/21
”