Bush BSBSFFB, Инструкция по установке и эксплуатации

Страница: 13 / 16


Warning: 2 people may be required to re-align the door.

A Philips screw driver will be required for this task.

Put a protective layer on the floor before tak ing off the door.
To disassembl e the door .
1. Unscrew the screw fixing the top hinge cover ( Fig. a).
2. Remove the top hinge cover ( Fig. b).
3. Unscrew the screw that secu r es the top hinge ( Fig. c)
4. Press on the lock of the cable connector ( Fig.d ) and
separate the lead wire ( Fig.e ).
5. One person should hold the door.
6. Remove the top hinge ( Fig. f) from the door. Take care
o f the lead wire to avoid any damage t o the wire .
7. Move the door upward to release it from the bottom hinge ( Fig. g &h ).
8. Lay the door on the floor on a protective layer to
avoid making scratch ing the surface .
Care and Maintenance
Moving your appliance
Disassembly / assembly the door
Moving
Refer to section “Transportation” under “Installation”
y
In case, there is problem with a door , y ou can contact the service agent for a replacement or you can
replace it by yourself.
y
The size of the doors are , Freezer 395 mm(W) x1714mm (H) and Fridge 500 mm(W) x1714mm (H) .
1 2
To assemble the door
1. Carefully lift the door. Align the hole in the lower corner
of the door over the lower hinge. Lower the door onto
the lower hinge.
2. Insert the upper hinge into the hole on the upper edge
of the door.
3. One person should hold the door in place.
4. Make sure the hinge is level between the upper hinge
hole and the hole on the top of the cabinet.
5. Reattach the hinge screws to secure the door.
6. Reconnect the lead wires and refit the top hinge cover.
Reattach the hinge cover with the screw.