BUSH BR30DABAM
BUSH BR30DABAM
8
9
GETTING STARTED
Carefully remove your
DAB+ Receiver
from the packaging. You may wish to keep the packaging
for future use.
IN THE BOX
Inside the box you will find:
■
BR30DABAM (Main Unit)
■
AC Adaptor
■
User Guide
POSITIONING YOUR DAB+ RADIO
Place your
DAB+ Receiver
on a flat / stable surface. Make sure it is not subject to vibrations or
movement.
ADJUSTING THE ANTENNA
The antenna should be extended to ensure good reception in DAB+, FM, AM radio modes. It may
be necessary to alter the position of the
DAB+ Radio
and /or antenna to achieve the best signal.
USING HEADPHONES
To listen to your
DAB+ Radio
via Headphones, you will require headphones with a 3.5 mm
diameter stereo plug (not included). The Headphone Socket is located on the left hand side of the
unit. Plug the Headphone Jack into the headphone socket, the speaker sound will automatically turn
off once the headphone is plugged in.
TURNING ON YOUR DAB+ RADIO
1. Connect the 3.5mm AC adapt plug to the DC Socket on the left side of the unit, then plug the
adaptor into the mains wall outlet.
2. To switch on, slide the
Power Selector
to
On
position and slide the
Band Selector
to
DAB
.
When DAB mode is selected for the first time, the display will illuminate and welcome to DAB will
be displayed. Then carefully extend antenna for the best possible reception.
3. When you turn on your
DAB+ Radio
for the first me it will conduct a full station scan and store
all the available Radio Stations in the list. This may take a few minutes.
Please Note:
a)
The
DAB+ stations
will be displayed in alphanumeric order. The first in the list will be played
after the scan has been completed.
b)
If no
DAB+
signal is found in your area, it may be necessary for you to relocate your radio or
visit
www.digitalradioplus.com.au
to check if
DAB+
is available in your area.
CHANGING STATIONS
To scroll through the station list and change the DAB+ Station playing, press the NAVIGATION
Buttons (
t
and
u
). Press the Buttons repeatedly to scroll through the list. The stations will be
displayed on the LCD screen. Press the SELECT button to change to the required station.
ADJUSTING THE VOLUME
To adjust the volume, turn the Volume Control which located on the right side of the radio. To
increase the volume - scroll up on the dial, to decrease the volume - scroll down on the dial.
