BR10DAB
18
NOTE: When you scan through conventional FM frequencies, the stations are
detected based upon the intensity of the signal. Automatic FM scans may detect
very noisy or distorted stations-it may b e necessary to re-scan, adjust the aerial/
radio position or fine-tune the signal to achieve the best results.
Manual Tuning of FM mode
Press the
SELECT/NAV
button once, the desired frequency blink on the
DISPLAY and press the
- / +
buttons to manually scan through the frequency
band.
If the reception does not improve, try altering the position/length of the aerial. If the
reception is still poor, scan again to determine whether a stronger signal exists
for the desired frequency.
When you have tuned into the desired frequency/station, you can save it in one of
the ten preset locations, see below.
Using the FM Radio
If the
DAB Receiver
is in
DAB
mode, press the
MODE
button to select
FM
mode.
You may hear background noise as no station has been tuned in. The
DISPLAY
will show
the frequency.
NOTE: If the Radio is switched off in FM mode it will always resume in FM mode
in last selected station, when switched back on. If RDS information is available, the
display will then show the radio station name.
Automatic Tuning of FM mode
Press the
SCAN
button to automatically search for the next available station.
If the reception is poor, use the Manual Tuning (see the Manual Tuning of FM) to
fine-tune the station. If the reception does not improve, try altering the
position/lenght of the aerial. If the reception is still poor, scan again to determine
whether a stronger signal exists for the desired frequency.
When you have tuned into the desired frequency/station, you can save it in one of
the ten preset locations.
Using FM Radio
