Bush BIE7030FF, Инструкция по эксплуатации

Страница: 14 / 36

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.
14
Installation warnings
Before using your refrigerator for the first time,
please pay attention to the following points:
• The operating voltage for your refrigerator is
220-240 V at 50Hz.
• The plug must be accessible after installation.
• Your refrigerator may have an odour when
it is operated for the first time. This is normal
and the odour will fade when your refrigerator
starts to cool.
• Before connecting your refrigerator, ensure
that the information on the data plate (voltage
and connected load) matches that of the
mains electricity supply. If in doubt, consult a
qualified electrician.
• Insert the plug into a socket with an efficient
ground connection. If the socket has no
ground contact or the plug does not match,
we recommend you consult a qualified
electrician for assistance.
• The appliance must be connected with a
properly installed fused socket. The power
supply (AC) and voltage at the operating point
must match with the details on the name
plate of the appliance (the name plate is
located on the inside left of the appliance).
• We do not accept responsibility for any
damages that occur due to ungrounded
usage.
• Place your refrigerator where it will not be
exposed to direct sunlight.
• Your refrigerator must never be used
outdoors or exposed to rain.
• Your appliance must be at least 50 cm away
from stoves, gas ovens and heater cores, and
at least 5 cm away from electrical ovens.
• If your refrigerator is placed next to a deep
freezer, there must be at least 2 cm between
them to prevent humidity forming on the
outer surface.
• Do not cover the body or top of with lace.
This will affect the performance of your
refrigerator.
• Clearance of at least 150 mm is required
at the top of your appliance. Do not place
anything on top of your appliance.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly before use
(see Cleaning and Maintenance).
• The installation procedure into a kitchen
unit is given in the installation manual. This
product is intended to be used in proper
kitchen units only.
• Before using your refrigerator, wipe all parts
with a solution of warm water and a teaspoon
of sodium bicarbonate. Then, rinse with
clean water and dry. Return all parts to the
refrigerator after cleaning.
During Usage
• Do not connect your refrigerator to the mains
electricity supply using an extension lead.
• Do not use damaged, torn or old plugs.
• Do not pull, bend or damage the cord.
• Do not use plug adapter.
• This appliance is designed for use by adults.
Do not allow children to play with the
appliance or hang off the door.
• Never touch the power cord/plug with wet
hands. This may cause a short circuit or
electric shock.
• Do not place glass bottles or cans in the ice-
making compartment as they will burst when
the contents freeze.
• Do not place explosive or flammable material
in your refrigerator. Place drinks with high
alcohol content vertically in the fridge
compartment and make sure their tops are
tightly closed.
• When removing ice from the ice-making
compartment, do not touch it. Ice may cause
frost burns and/or cuts.
• Do not touch frozen goods with wet
hands. Do not eat ice-cream or ice cubes
immediately after they are removed from the
ice-making compartment.
Installing your Built-In Combi Fridge - Freezer
Installing your Built-In Combi Fridge - Freezer
Bringing it all together