5
DAB/FM/Bluetooth clock radio
STANDBY MODE
When the power is connected for the first time, the radio will enter standby mode.
Display will show the ‘
Time is not set
’ and the clock will flash ‘
00:00
’
TURNING YOUR RADIO ON FOR THE FIRST TIME:
When the radio is switched on for the first time it will automatically go into DAB mode.
The radio will display ‘
Scanning
’ on the screen and a bar will show the scanning
progress. The number on the right of scanning shows how many channels are found.
DAB RADIO MODE
In this mode, the radio receives a digital signal and displays information about the
radio station, music title, etc.
1. Press <POWER> to turn on. Then press the <MODE> button to select ‘DAB MODE’
on the display.
Note:
If no DAB reception is currently available, change the position of your device
or adjust the aerial. Press and hold the <MENU / INFO> button to enter the menu.
Turn the rotary button to select ‘Full scan’ and press the <SCROLL/SELECT> button
to confirm, this will start a new search.
2. In DAB mode, turn the rotary button to navigate through the available DAB channels.
First press the ‘TUNE’ button, and turn the rotary dial to select a channel from the list,
press the <SCROLL/SELECT> dial to confirm.
3. Short press the <INFO> button for more information about your DAB station.
Information such as:
-
DLS (Dynamic Label Segment) – scrolling text
-
Signal Strength
-
PTY (Programme Type)
-
Ensemble
-
Frequency
-
Signal quality
-
Bitrate codec
-
Time
-
Date
