
CAUTION
!
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY INFORMATION
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED
TO ALERT THE USER TO THE PRESENCE OF
UNINSULATED, "DANGEROUS VOLTAGE", WITH IN THE
PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTE-
NANCE (SERVICING) INSTRUCTIONS IN THE LITERA-
TURE ACCOMPANYING THE APPLIANCE.
Safety Precautions
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK. DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
1
10
TROUBLE SHOOTING GUIDE
If the subwoofer is not linking properly with the soundbar or there is no sound
coming from the subwoofer please follow the below steps:
1)
Press the "
STANDBY
" button on soundbar or on the remote control, and
switch off the subwoofer.
2)
After 15 seconds the coding
should be completed and the subwoofer will be connected to the soundbar
wirelessly. (You can confirm this by the blue light on the front of the
subwoofer. If the soundbar and subwoofer are connected the blue light will
be solid but if it is flashing then the subwoofer and soundbar are not
connected.)
Press the "
STANDBY
" button on soundbar or on the remote control again,
the soundbar gets into play-mode.And then switch on the subwoofer within
15 seconds after you pressed "STANDBY".
3) Please repeat the above steps if the soundbar is not connecting to the
subwoofer wirelessly.
4) Once the above steps have been completed and the soundbar is
connected to the subwoofer the settings will automatically save and there
should be no need to follow the above steps again unless the product is
disconnected from the mains power.