User instructions
PANELS
1
2 3
4
8
5 6 7
9
10
13
11
6
12
1. Microphone
2. Phone button
3. Standby / Mode
4. Play/ Pause
5. Next /
6. Indicator
7. Previous / Volume-
8. Speaker
9. Speaker ventilation
10. USB port
11. Left/Right Audio
input sockets
12. Power switch
13. Power input
CONNECTING MAINS POWER
• Check the voltage marked on the rear rating plate is
the same as the voltage in your area
.
• Connect the mains plug to the wall socket and switch
the mains switch (12) on the back of the unit to
ON
.
Standby mode
Switching modes
USB
, and
AUX IN.
the different mode.
Skip tracks
or the next track.
Press and hold the
/M
button for 3s to turn on the
unit or to put the system into standby mode.
To switch between the available modes:
Bluetooth
,
Press the
/M
button to cycle through the options,
and the indicator light will use different colors to show
Indicator light shows different mode status
Bluetooth
mode: the indicator flashes
blue quickly
.
USB mode:
the indicator flashes
yellow slowly
.
Aux in
mode: the indicator is
solid
yellow
.
Adjust the volume
Press and hold the
VOL+
or
VOL-
buttons to adjust the
volume to a comfortable level.
Standby
mode: the indicator lights
red
.
Press the or buttons to skip to the previous
Play or pause the music
Press the button to pause or resume the playing.
GENERAL
OPERATION
NOTE
:
This unit is designed to enter
STANDBY
mode automatically after
15
MINUTES
(approximately) of inactivity
.
Press the
STANDBY
button to wake the unit.
Page 3
