Bush AWBBDFO, Инструкция по эксплуатации

Страница: 15 / 37

Installing your Built-in Oven
Bringing it all together
Installing your Built-in Oven
1 4
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Installation
This appliance should be installed by a competent person or qualified electrician in a accordance with the
regulations in force (All relevant British Standard/ Codes of Practice/relevant Building/IET regulations)and in
a well ventilated space. Please read instructions before installing and using this appliance.
Important: - The power supply to the appliance must be cut off before any adjustments or maintenance work is
carried out.
Installation of Built-in Ovens
In order to ensure that the built-in appliance functions properly, the cabinet containing it must be appropriate .The
figure below gives the dimensions of the cut-out for installation under the counter or in a wall cabinet unit.
When installing you Built-in Double Oven, please make sure there is a minimum of 560mm depth for ventilation
which is required for this product..
The underside of the cabinet should be opened to allow for the correct air circulation.
If installing a base panel leave a space as indicated the
left-hand image to allow for air circulation.