Control of the hob burners
.
The knob has 3 positions: Off (0), maximum (big
flame symbol) and minimum (small flame
symbol). After you ignite the burner in
maximum position; you can adjust the flame
length between maximum and minimum
positions.
Do not
operate the burners when the
knob position is between maximum and off
positions.
After the ignition, check the flames visually. If
you see yellow tip, lifted or unstable flames;
turn the gas flow off, and check the assembly of
burner caps and crowns. Also, make sure that
no liquid has flown into the burner cups. If the
burner flames go out accidentally, turn the
burners off, ventilate the kitchen with fresh air,
and
do not
attempt re-ignition for 90 sec.
When turning the hob off, turn the knob in the
clockwise direction so that the knob shows "0"
position or the marker on the knob points
upwards.
Your hob has burners of different diameters.
The most economic way of using gas is too
choose the correct size gas burners for your
cooking pan size and to bring the flame to
minimum position once the boiling point is
reached. It is recommended to always cover
your cooking pan.
In order to obtain maximum performance from
the main burners, use pots with the following
flat bottom diameters. Using smaller pots than
the minimum dimensions stated below will
cause energy loss.
Make sure that the tips of the flames
do not
spread out of the outer circumference of the
pan, as this may also harm the plastic
accessories around the pan (handles etc.)
When the burners are not in use for prolonged
periods, always turn the main gas control valve
9
User Instructions
Rapid Burner: 22-26cm
Medium Burner: 14-22cm
Auxiliary Burner: 12-18cm
Customer Helpline
0345 257 7271
Using the hob
Figure 4
Figure 5
Off
Min
Max
Figure 6
AG66DSS
