Bush 9511174, Инструкция по эксплуатации

Страница: 19 / 68

First Time Installation
When turned on for the first time, the language selection
screen is displayed. Select the desired language and press
OK . In the following steps of the installation guide, set
your preferences using the directional buttons and OK
button.
After the language selection, you will be asked whether
you want to change accessibility settings. Highlight
Yes
and press
OK
to change. Refer to
System Menu Content
section for detailed information on available options.
Set your country preference on the next screen.
Depending on the country selection you may be asked
to set and confirm a PIN at this point. The selected PIN
cannot be 0000. You have to enter it if you are asked to
enter a PIN for any menu operation later.
You can activate
Store Mode option in the next step.
This option will configure your TV’s settings for store
environment and depending on the TV model being
used, the supported features of it may be displayed on
the screen as an info banner or the pre-installed video
file may be played back. This option is intended only
for store use. It is recommended to select
Home Mode
for home use.
Store mode
option will be available in
Settings>System>More menu and your preference for
this setting can be changed later. Make your selection
and press
OK to continue.
Depending on the model of your TV, the picture mode
selection screen may appear at this point. In order for your
TV to consume less energy and be more environmentally
friendly select
Natural
and press
OK
to continue. If you
select
Dynamic
and press
OK
, a confirmation dialogue
will be displayed. Select
Yes
and press
OK
to proceed. You
can change your selection later using the
Mode
option
in the
Settings>Picture
menu.
Depending on the model of your TV and the country
selection
Privacy Settings screen may appear at this
point. Using the options on this screen you can set
your privacy privileges. Highlight a feature and use Left
and Right directional buttons or
OK button to enable
or disable. Read the related explanations displayed on
the screen for each highlighted feature before making
any changes. You can use
Pro/-
buttons to
scroll up and down to read the entire text. You will be
able to change your preferences at any time later from
the
Settings>System>Privacy
menu. If the
Internet
Connection
option is disabled
Network/Internet
Settings screen will be skipped and not displayed. If you
have any questions, complaints or comments regarding
this privacy policy or its enforcement, please contact by
email at smarttvsecurity@vosshub.com.
Highlight
Next and press OK button on the remote
control to continue and the Network/Internet Settings
screen will be displayed. Please refer to Connectivity
section if you need information on configuring a wired
or a wireless connection (availability depends on the
model) and other available options. If you want your TV
to consume less power in standby mode, you can disable
the
Networked Standby Mode option by setting it as Off .
After the settings are completed highlight Next and press
OK button to continue.
On the next screen you need to agree to the terms and
conditions of Freeview Play to make use of the related
services. Scroll the page to read the entire text using the
up/down directional buttons or
Pro/-
buttons.
Highlight
Yes
and press
OK
on the remote to confirm and
proceed. Highlight
No
and press
OK
to proceed without
confirmation. For further requirements for Freeview Play
services refer to the
Freeview Play Platform
section.
On next screen you can set broadcast types to be
searched, set your encrypted channel searching and time
zone (depending on the country selection) preferences.
Additionally you can set a broadcast type as your favourite
one. Priority will be given to the selected broadcast type
during the search process and the channels of it will
be listed on the top of the channel list. When finished,
highlight
Next
and press
OK
to continue.
About Selecting Broadcast Type
To turn a search option on for a broadcast type highlight
it and press
OK , Left or Right directional button. The
checkbox next to the selected option will be checked. To
turn the search option off clear the checkbox by pressing
OK , Left or Right directional button after moving the focus
on the desired broadcast type option.
Digital Aerial:
If
D. Aerial
broadcast search option
is turned on, the TV will search for digital terrestrial
broadcasts after other initial settings are completed.
After the initial settings are completed the TV will start to
search for available broadcasts of the selected broadcast
types.
While the search continues current scan results will be
displayed at the bottom of the screen. You can press the
Home , Back or Exit button to cancel the search. The
channels that have already been found will be stored in
the channel list.
After all the available stations are stored,
Channels
menu
will be displayed. You can edit the channel list according
to your preferences using the
Edit tab options or press
the Home button to quit and watch TV.
While the search continues a dialogue may appear, asking
whether you want to sort channels according to the
LCN
(*) . Select Yes and press OK to confirm.
(*)
LCN is the Logical Channel Number system that
organises available broadcasts in accordance with a
recognisable channel number sequence (if available).
Note: Do not turn off the TV while initialising first time
installation. Note that, some options may not be available
depending on the country selection.
Connections
Bringing it all together
Connections 17
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line .