Bush 9511143, Инструкция по эксплуатации

Страница: 27 / 68

For further information on using this feature refer to the
instructions of the application you use.
Note: Depending on model, your TV may not support this
function. The application may not be compatible with all
mobile devices. Both of the devices must be connected
to the same network. This feature is only functional on
TV source.
CEC
This function allows the user to control the CEC-enabled
devices, that are connected through HDMI ports by using
the remote control of the TV.
The
CEC
option in the
Settings>System>Device Settings
menu should be set as Enabled at first. Press the Source
button and select the HDMI input of the connected CEC
device from the
Sources List
menu. When a new CEC
source device is connected, it will be listed in
Sources
menu with its own name instead of the connected HDMI
port’s name (such as DVD Player, Recorder 1, etc.).
The TV remote is automatically able to perform the main
functions after the connected HDMI source has been
selected. To terminate this operation and control the TV
via the remote again, press and hold the “0-Zero” button
on the remote control for 3 seconds.
You can disable the CEC functionality by setting the
related option under the
Settings>System>Device
Settings menu accordingly.
The TV supports ARC (Audio Return Channel). This feature
is an audio link meant to replace other cables between the
TV and an audio system (A/V receiver or speaker system).
When ARC is active, the TV will mute its other audio
outputs, except the headphone jack, automatically and
volume control buttons are directed to the connected
audio device. To activate ARC set the
Sound Output
option in the Settings>Sound menu as HDMI ARC .
Note: ARC is supported only via the HDMI2 input.
Enhanced Audio Return Channel
(eARC)
Similar to ARC, the eARC feature enables the transfer of
the digital audio stream from your TV to a connected
audio device via the HDMI cable. eARC is an improved
version of ARC. It has a much higher bandwidth than
its predecessor. Bandwidth represents the range of
frequencies or amount of data that is being transferred
at a time. Higher bandwidth translates into a higher
amount of data that can be transferred. Higher bandwidth
also means that digital audio signal doesn’t have to be
compressed and is much more detailed, rich, and vibrant.
When eARC is enabled from the sound menu, the TV first
tries to establish eARC link. If eARC is supported by the
connected device, the output turns into eARC mode and
the “eARC” indicator can be observed on the connected
device’s OSD. If an eARC link cannot be established (for
example, the connected device is not supporting eARC
but supporting ARC only) or if eARC is disabled from the
sound menu, then TV initiates ARC.
For eARC to function properly;
• The connected audio device should also support eARC.
• Some HDMI cables do not have enough bandwidth to
carry high-bit-rate audio channels, use an HDMI cable
with eARC support (HDMI High Speed Cables with
Ethernet and the new Ultra High Speed HDMI Cable -
check hdmi.org for latest info).
• Set the Sound Output option in the Settings>Sound
menu to
HDMI ARC
. The
eARC
option in the
Sound
menu will be enabled. Check to see if it is set to
On
. If
not, set it to On .
Note: eARC is supported only via the HDMI2 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with the
TV. The volume can be controlled using the remote
control of the TV. To activate this feature set the
Sound
Output option in the Settings>Sound menu as HDMI
ARC . When HDMI ARC option is selected, CEC option
will be set as
Enabled
automatically, if it is not already
set. The TV speakers will be muted and the sound of the
watched source will be provided from the connected
sound system.
Note: The audio device should support System Audio
Control feature.
Game Mode
You can set your TV to achieve lowest latency for games.
Go to
Settings>Picture
menu and set the
Mode
option
to Game . Game option will be available when the TV’s
input source is set to HDMI. When set the picture will be
optimised for low latency.
Auto Low Latency Mode
You can also enable the
ALLM (Auto Low Latency Mode)
option in the Settings>System>Device Settings menu.
If this function is enabled the TV automatically switches
the picture mode to
Game
when ALLM mode signal is
received from the current HDMI source. TV switches back
to previous picture mode setting when the ALLM signal is
lost. So you won’t need to change the settings manually.
Advanced features
Getting the most from your TV
Advanced features 25
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line .