Bush 762/6504, Инструкция по эксплуатации

Страница: 19 / 40

Installing the remote batteries
1. Press down the tab on the remote control battery
door, in the direction of the arrow, to remove it.
2. Insert the 2 x AAA batteries supplied, taking care
to the + and - markings and position the batteries
the correct way around.
3. Replace the battery cover, making sure that it
‘clicks’ shut.
The remote signal may not be received if there is an obstacle between the remote
control and the remote sensor on your DVD Player.
Note: Direct sunlight or other bright light sources shining on the remote sensor may
affect the performance of the remote control.
Connecting the mains power
1. Connect the mains power lead into the socket on the back of
the DVD Player.
2. Plug the power adapter into the mains power wall socket
and switch on.
Note:
Do not connect the mains power until ALL other
connections have been made.
3. The Red LED on the front right of your DVD Player will turn
on and your DVD Player will now be in Standby mode.
Remote control working range
Getting to know your DVD player
You’ll be up and running in no time
ENTER
1 2 3
4 5 6
7 8 9
10+
SUBTITLE
LANGUAGE
OSD
PROG CLEAR
SETUP SOURCE
MENU MUTE
REPEAT SEARCH
REV
FWD
STOP PLAY/PAUSE
PREV
NEXT
VOLUME
-
+
TITLE RETURN A-B SLOW
ANGLE ZOOM AUDIO STEP
0
USB
section of these instructions Or by calling one of our experts on 0345 604 0105
19
16 Feet (5M)