Bush 731/6876, Инструкция по эксплуатации

Страница: 19 / 44

19
Using your DAB/FM Digital Radio
Let’s get started
Automatically setting the clock
The clock will be updated automatically if you can receive DAB/FM
signal in your location.
In order to synchronise to the current local time, you must leave the
unit to receive signals from the DAB/FM station for a period of time.
DAB operation
If the unit is connected to the mains power and then switched on for
the first time, the unit will automatically enter into the DAB mode and
perform full scan. During the scan the display
will show "
SCANNING ", then show up arrow
bar indicating the progress of the scan and the
number of stations that have been found so far.
Once the scan has finished, the unit will select
the first alphanumerically found station. To
explore the found stations, turn the
TUNE/SELECT dial and then press
TUNE/SELECT
dial to confirm selection.
Full scan
The full scan will search for the entire DAB Band III channels. After
the scan has finished, the first alphanumerically found station will be
automatically selected.
1. To activate Full Scan, press and hold
INFO/MENU button then turn
TUNE/SELECT dial to select <FULL SCAN> . Press TUNE/SELECT
dial to confirm. The display will show "
SCANNING
", then show up
arrow bar indicating the progress of scan status and number of
station found.
2. All the stations that have been found will be stored automatically.
To explore and listen to the found stations, turn TUNE/SELECT dial
and then press
TUNE/SELECT
dial to confirm selection.