Bush 487/6474, Инструкция по эксплуатации

Страница: 31 / 48

31
Using your Outdoor DAB Radio
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
Using your Outdoor DAB Radio
Let’s get started
Setting the alarm
Note: Check that the radio has the correct time and date before you set an alarm.
With your radio switched on (not in Standby mode):
1. Press and hold the Menu/Info button to enter the menu options..
2.
Use the Tune control to scroll to <System>. Press and release the Enter button.
3.
Use the Tune control to scroll to <Alarm 1> or <Alarm 2> as required. Press and release
the Enter button.
4. Alarm 1 (or 2) Setup is displayed. Press and release the Enter button.
5.
Alarm 1 (or 2) Wizard On time is displayed and the hour digits for the alarm will flash.
6.
Use the Tune control to scroll to the hour for the alarm and press and release the Enter
button.
7. The minutes will now flash. Use the Tune control to scroll to the minutes for the alarm
and press and release the Enter button. The duration time will now flash.
8. Use the Tune control to scroll to the duration for the alarm. You can choose from 15,
30, 45, 60 and 90 minutes. Press and release the Enter button. The source for the
alarm will now flash.
9.
Use the Tune control to scroll to the sound source for the alarm. You can choose from
Buzzer, DAB or FM. Press and release the Enter button.
Note: If you select DAB or FM radio for the alarm source, ‘Last listened’ will flash in the
display. Press the Enter button and the last listened to radio station in DAB or FM, as
appropriate, will be used for your alarm.
10. Use the ‘Tune/Select’ rotary control to scroll to the frequency for the alarm. You can
choose from Daily, Once, Weekends or Weekdays. Press and release the Enter button.
Note: If you select ‘Once’, you will then be prompted to set the date for your alarm.