Bush 411010, Инструкция по эксплуатации

Страница: 38 / 44

Product support
Help is always at hand
Product support
38
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Troubleshooting
No sound / power:
• Adjust the volume.
• Check that the mains power wall socket is switched on and that your radio is not in
Standby mode.
Radio reception is poor:
• Make sure that you have fully extended the telescopic aerial.
• Rescan for radio stations, see pages 20 and 24.
• Try moving your radio to another location to see if reception improves.
• Check that you do not have other electrical equipment too close to your Radio,
causing interference.
• Visit www.digitalradionow.com for information about DAB reception in your area.
The function buttons do not respond:
• Check that the mains power lead is connected at the back of your radio and the mains
power wall socket is switched on. Press and release the Standby button.
• Unplug the mains power. Leave the radio for 3 minutes and then reconnect the power.
• Try a reset to factory defaults. See page 34.
Note:
All of your settings, including the radio station list and any presets will be deleted
when you reset the Radio.