Bush 356/6314, Инструкция по эксплуатации

Страница: 15 / 24

15
Setting the alarm
Note: Check that the radio has the correct time and date before you set an alarm�
In DAB or FM mode:
1� Press and release the ‘Alarm’ button on the front of the radio, ‘Alarm 1 Setup’ is
displayed� Press the rotary control to ‘Select’�
Note: Press and release the ‘Alarm’ button twice to enter the Alarm 2 setup�
2� ‘Alarm 1 Wizard’ is displayed and the hour digits for the alarm will lash�
3� Use the right hand rotary control to scroll to the hour for the alarm� Press the
rotary control to ‘Select’�
4� Use the right hand rotary control to scroll to the minutes for the alarm� Press the
rotary control to ‘Select’�
5� Use the right hand rotary control to scroll to the duration for the alarm� You can
choose from 15, 30, 45, 60 and 90 minutes� Press the rotary control to ‘Select’�
6� Use the right hand rotary control to scroll to the sound source for the alarm� You
can choose from Buzzer, DAB or FM� Press the rotary control to ‘Select’�
Note: If you choose DAB or FM as the sound source, you are prompted to select
the station you Last Listened to or one of your preset radio stations� Use the right
hand rotary control to scroll through the available options and press to ‘Select’�
7� Use the right hand rotary control to scroll to the frequency for the alarm� You can
choose from Daily, Once, Weekends or Weekdays� Press the rotary control to
‘Select’�
8� ‘Alarm 1 Wizard’ is displayed again, together with ‘Alarm Of (or On)’� Use the right
hand rotary control to choose ‘Alarm On’ or ‘Of’ and press the rotary control to
‘Select’� ‘Alarm Saved’ is displayed�
Note: Remember to set the alarm radio volume, using the left hand rotary control,
to one that will wake you� The alarm volume will increase progressively until it
reaches the alarm volume you have set�
9� In Standby mode a bell symbol in the top right of the display will conirm when an
alarm has been set�
Note: If the time is not set or has failed to update from the radio signal, ‘Time is not
set’ will be displayed when you try to set the alarm� The radio will then prompt
you to set the time� An alarm can only be set after the time has been set�