Bush 32/149, Руководство пользователя, Страница: 6 / 30

10
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
To complete the stand installation you will require a cross head screw driver.
The
Stand Installation pack comes with two different
types of screws.
fi g 1) Attach the stand neck to the rear of the TV set.
fi g 2) Secure the neck to the TV using the
5 x M (4x10) screws provided.
fi g 3) Attach the stand base to the neck.
fi g 4) Secure the base to the neck using the
3 x ST (3.7x18) screws provided.
Attaching The Stand
HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION
When securing the self-tapping screw/s into the base of the stand (on fi rst installation) the screw/s will be
naturally tight as they create a thread in the plastic of the stand neck in order to support a TV of this size.
a) Ensure the cross head screw driver tip fi ts correctly into the head of the
screw and that it is not too big or small.
b ) Screw in all screws individually and partially before tightening all of the
screws fully.
c) If they become very tight try loosening them slightly and then re-tightening them once again as this will
continue the process of creating the thread for the screws.
5 x M(4x10)
1 1/2
3 x ST (3.7x18)
1
2
3
4
3 x ST (3.7x18)
5 x M(4x10)
User Guide - Bush -32-149 BUS-MAN-0012.indd Sec1:10 User Guide - Bush -32-149 BUS-MAN-0012.indd Sec1:10 10/30/2014 2:03:51 PM 10/30/2014 2:03:51 PM