Bush-whacker T-121, Руководство оператора и каталог запасных частей, Страница: 17 / 60

17
2009 T-121
Gearbox Disassembly Procedure
1. Remove 3/8” bolts from input cap. Remove the input cap taking care not to damage the seal
in the cap.
2. The input shaft assembly can now be removed. To disassemble the input shaft assembly it is
not necessary to remove the retaining ring. The bearing will press off of the ends of the
shaft and the gear will slide off.
3. The output gear will slide off of the output shaft.
4. Remove the 1/2” bolts from the output cap and remove the output cap; once again take care
not to damage the seal.
5. The output shaft assembly will have to be pressed out from the inside or it can be pulled out.
The bearings will need to be pressed off.
6. If any of the bearing races either in the housing or in the input cap need to be removed, a
blind hole bearing puller should be used.