manualshive.com logo in svg

Bush Power G2000X, Руководство по эксплуатации

Поделиться
Скачать
Bush Power G2000X Скачать руководство пользователя страница 27

Wash your hands with soap and water after handing used oil.

Please dispose of used motor oil in a manner that is responsible 

with the environment in mind. We suggest you take it in a sealed 
container to your local service station for reclamation. Do not throw 
it in the trash or pour it on the ground.

Air Cleaner Service

A dirty air cleaner will restrict air flow to carburettor. To prevent carburettor 

malfunction, service the air cleaner regularly. Service more frequently 
when operating the generator in extremely dirty areas.

Do not use gasoline or low flash point solvents for cleaning. They 

are flammable and explosive under certain conditions.

1.  Loosen the cover screw and remove the access panel.
2. 

Remove the screw under the air filter case.

3. 

Pull the air filter cartridge down 30mm and remove the air filter 

cartridge.

4. 

Remove the air filter iron clip and check the air filter element. Clean or 

replace the element if necessary.

5. 

Reinstall the air filter parts after cleaning or replacing air filter element.

   

   

Содержание G2000X












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды