manualshive.com logo in svg

Bush Hog ZERO TURN MOWERS, Руководство оператора

Поделиться
Скачать
Bush Hog ZERO TURN MOWERS Скачать руководство пользователя страница 22

SECTION IV

ASSEMBLY

POWER UNIT ASSEMBLY

Mounting Drive Tires

Remove tractor from crating.  Lay out hardware in
bolt bag.

Mount the drive tires with the five 1/2” lug nuts provid-
ed.  Bush Hog offers three styles of drive tires; Turf
Tire, Knobby Tire, and a Bar Tire.  When installing
the bar tire please notice the direction of the cleats on
the tires.  Install the bar tires as pictured on page 18.
Torque the lug nuts to 50 ft./lbs.

Mounting the Single Rear Tailwheel

A. Remove the rear engine cover by loosening

the three knobs.

B. Remove the tailwheel assembly from the box

and assemble the wheel and fork assembly with the
1” clamp collar.  Tighten collar with a socket head
bolt.

Mounting the Dual Rear Tailwheel

A. Remove the rear engine cover by loosening

the three knobs.

B. Remove the tailwheel assembly from the box

and assemble the wheel and fork assembly with the
1” clamp collar.  Tighten collar with a socket head
bolt.

C. Attach the caster mount weldment to the

power unit frame with (4) 1/2” x 1-1/2” capscrews
and locknuts.

D. Install the spacer tube in the tailwheel assem-

bly and align with the hole in the caster mount weld-
ment.  Secure with the 5/8” x 6-1/2” capscrew, flat-
washer and locknut.

E. Reinstall the rear cover and tighten the three

knobs.

C. Attach the tailwheel mount assembly to the

power unit frame with (8) 1/2” x 1-1/2” capscrews
and locknuts.

D. Reinstall the rear cover and tighten the three

knobs.

Mounting the Seat

A. Line up the four studs on the seat bracket

with the four holes on the seat plate.  Secure the
seat with (2) of the 5/16” flange locknuts.

B. Install the wire clamps onto the seat switch

wires as shown below .  Attach the wire clamps onto
the two remaining seat studs and secure with 5/16”
flange locknuts.

C. Attach the seat safety wires to the seat

switch.

Underside Of 

Seat Plate

Wire Clamps

1” Clamp Collar

1” Clamp Collar

Fork Assembly

Fork Assembly

Single Tailwheel Mount Assembly

Power Unit Frame

Tailwheel

Tailwheel

Dual Tailwheel Mount Assembly

Caster

Mount

20

Safety

Wires

Seat

Switch

Содержание ZERO TURN MOWERS































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды