background image

 Safety

Safety

8

MS250G, MS500G, MS800G, MS500P, MS800P 

Compact Manure Spreader

3.  Safety

3.1  Safety Alert Symbol

This safety alert symbol means: 

ATTENTION! BE ALERT! 
YOUR SAFETY IS INVOLVED!

The safety alert symbol identifies important safety messages 
on the Bush Hog Manure Spreader and in the manual. 

When you see this symbol, be alert to the possibility of 
personal injury or death. Follow the instructions in the safety 
message.

3.2  Signal Words

The signal words 

DANGER

WARNING,

 and 

CAUTION

 determine 

the seriousness level of the warning messages in this manual. 
The appropriate signal word for each message in this manual 
has been selected using the following guidelines:

DANGER –

Indicates an imminently hazardous situation that, if not avoided, 

will

 result in death or serious injury. This signal word is to be 

limited to the most extreme situations typically for machine 
components which, for functional purposes, cannot be shielded.

WARNING –

Indicates a potentially hazardous situation that, if not avoided, 

could

 result in death or serious injury, and includes hazards that 

are exposed when shields are removed. It may also be used to 
alert against unsafe practices.

CAUTION –

Indicates a potentially hazardous situation that, if not avoided, 

may

 result in minor or moderate injury. It may also be used to 

alert against unsafe practices.

IMPORTANT

 – To avoid confusing equipment protection 

with personal safety messages, the signal word IMPORTANT 
indicates a situation that if not avoided, could result in damage 
to the machine.

3.3  Why is SAFETY important?

• 

Accidents disable and kill people.

• 

Accidents cost money.

• 

Accidents are preventable.

YOU

 are responsible for the SAFE operation and maintenance of 

your Bush Hog product. 

YOU

 must make sure that anyone who 

is going to use, maintain, or work around the machine is familiar 
with the operating and maintenance procedures and related

 

SAFETY 

information contained in this manual. This manual 

alerts you to good safety practices that should be followed while 
using your Bush Hog equipment. 

YOU 

are the key to safety. Good safety practices not only protect 

you but also the people around you. Make these practices a 
working part of your safety program. Make sure that 

EVERYONE

 

using this equipment is familiar with the recommended operating 
and maintenance procedures, and that they follow all the safety 
precautions. 

Do not risk injury or death by ignoring good safety practices.

Содержание MS250G













































Отзывы: