DURING IMPLEMENT ADJUSTMENT
KEEP BODY, HANDS AND FEET CLEAR
OF SPOONS OR FRAME.
ATTACHMENT
The implement should be placed on level ground.
Place the tractor rockshaft control in “position con-
trol” (non-floating) for attaching and detaching the
implement. “Draft control” or “position control” can
be used while operating.
Attach the center link to the top of the mast and
adjust so that the frame will be level in the operating
position. Remove parking stands and store in the
upside down position.
DETACHING FROM TRACTOR
Pin parking stands into position and lower the imple-
ment to the ground with rockshaft control in position
control. Remove top link from mast, disconnect hitch
arms from bottom pins and pull tractor away from
implement.
Back the tractor until the ends of the lift arms can be
attached to the lift points on the implement. Secure
the lift arms to the lower lift points. (Figure 1)
6
WARNING
Figure 1 MPG 600 Plugger
Top Link Lift Point
Lower Lift Points
Parking Strand
Mast
Greasable Shaft Sleeve
Spoons
Weight Rack
SPECIFICATIONS
MODEL
SIZE
TYPE HITCH
HUBS
SPOONS
APPROX. WT.
MPG-600
60”
Lift
10
80
460 lbs.
MPG-720
72”
Lift
12
96
500 lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SECTION I
OPERATION
