DEALER PREPARATION CHECK LIST
GT 4
2
Rotary Cutter
BEFORE DELIVERING MACHINE — The following check list should be completed.
Use the Operator’s Manual as a guide.
ASSEMBLY
r
1. Axle assembly
r
2. Tongue assembly
r
3. Throttle assembly
ENGINE SERVICE (Refer to Engine Owner’s Manual)
r
1. Oil reservoir filled
r
2. Gas tank filled
GENERAL
r
1. All shields in place
r
2. All safety decals legible (If damaged, Bush Hog will
furnish free upon request)
r
3. All bolts tight (Including blade bolts)
r
4
.
Machine operates properly
p
5. Overall condition good
r
6
.
Operator’s Manual and Engine Manual was delivered to owner, and he has
been instructed on the safe and proper use of cutter.
r
7. Kill switch cord included
r
8.Warranty information has been filed with Bush Hog Selma, Alabama.
Dealer’s
Signature
Purchaser’s
Signature
THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL
It is the responsibility of the dealer to complete the procedures listed
above before delivery of this implement to the customer.
3
SAFETY DECALS
To promote safe operation, Bush Hog supplies safety decals on all products manufactured. Because damage
can occur to safety decals either through shipment, use or reconditioning, Bush Hog will, upon request, provide
safety decals for any of our products in the field at no charge. Contact your authorized Bush Hog dealer for
more information.
18
Part No. 81752
Part No. 81754
Part No. 81753
Ë
Ì
Ê Ë Ì
Part No. 96103
Í
Í
Ê
