3 | Transport
6 / 28
0870169116_RH0003-0021B_-0002_IM_en
2.4 Optional Accessories
2.4.1 Inlet Filter
It protects the machine against dust and other solids in the process gas. The inlet filter is
available with a polyester cartridge.
2.4.2 Oil Mist Separator
To reduce the oil consumption and trap any oil mist, when operating at a high suction
pressure, it is recommended to fit an oil mist separator at the discharge connection
(OUT).
To allow the oil to return to the machine in continuous operation, please comply with
the conditions for
Continuous Operation [
}
13]
.
2.5 Motor Variants
The Zebra RH 0003-0021 B are equipped with multi-voltages and multi-frequencies mo-
tors (50 Hz/60 Hz).
They can be delivered either with a single-phase or three-phase motor, except for
RH 0003 B which is only available with a single-phase motor.
3
Transport
WARNING
Suspended load.
Risk of severe injury!
• Do not walk, stand or work under suspended loads.
CAUTION
Handle the machine by hand.
Risk to injury!
• Do not lift by hand a machine heavier than 20 kg.
• Follow all safety provisions in order to prevent an accident.
NOTICE
In case the machine is already filled with oil.
Tilting a machine that is already filled with oil can cause large quantities of oil to in-
gress into the cylinder. Starting the machine with excessive quantities of oil in the
cylinder will immediately break the vanes and ruin the machine!
• Drain the oil prior to every transport or always horizontally transport the machine.
