manualshive.com logo in svg

BUSCH R5 RA 0025F, Инструкция по эксплуатации

Поделиться
Скачать
BUSCH R5 RA 0025F Скачать руководство пользователя страница 16

9 | Decommissioning

16 / 24

0870157201_RA0025-0040F_A0002_IM_en

9

Decommissioning

• Shut down the machine and lock against inadvertent start up.

• Vent the connected lines to atmospheric pressure.

• Disconnect all connections.

In case of storage is planned:

• See 

Storage [

}

 6]

.

9.1 Dismantling and Disposal

• Drain the oil.

• Remove the exhaust filters.

• Remove the oil filter.

• Separate special waste from the machine.

• Dispose of special waste in compliance with applicable regulations.

• Dispose of the machine as scrap metal.

10 Spare Parts

NOTICE

Use of non-Busch genuine spare parts.

Risk of premature failure!

Loss of efficiency!

• The exclusive use of Busch genuine spare parts and consumables is recommended for

the proper function of the machine and for granting of warranty.

Spare parts kit

Description

Part no.

Service kit

Includes all the necessary parts for main-
tenance.

0992 101 463

If other parts are required:

• Contact your Busch representative for the detailed spare parts list.

All manuals and user guides at all-guides.com

all-guides.com

Содержание R5 RA 0025F

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды