BUSCH Mink Oxygen, Инструкция по эксплуатации

Страница: 14 / 24

7 | Maintenance
14 / 24 0870168409_MV0602B_O2_A0000_IM_en_MD
CAUTION
Hot surface.
Risk of burns!
• Prior to any action requiring touching the machine, let the machine cool down first.
NOTICE
Using inappropriate cleaners.
Risk of removing safety stickers and protective paint!
• Do not use incompatible solvents to clean the machine.
CAUTION
Failing to properly maintain the machine.
Risk of injuries!
Risk of premature failure and loss of efficiency!
• Respect the maintenance intervals or ask your Busch representative for service.
• Shut down the machine and lock against inadvertent start up.
• Vent the connected lines to atmospheric pressure.
If necessary:
• Disconnect all connections.
• Make sure to have an authorisation from Busch to perform any maintenance tasks.
7.1 Maintenance Schedule
The maintenance intervals depend very much on the individual operating conditions.
The intervals given below are considered as starting values which should be
shortened or extended as appropriate. Particularly harsh applications or heavy duty
operation, such as high dust loads in the environment or in the process gas, other
contamination or ingress of process material, can make it necessary to shorten the
maintenance intervals significantly.
Every 3 months
• Check the oil level, see Oil Level Inspection
[ ► 14] .
Every 6 months • Clean the machine from dust and dirt.
Every 6 years • Have a major overhaul on the machine (contact
Busch).
7.2 Oil Level Inspection
• Shut down the machine.
• When the machine is stopped, wait 1 minute before checking the oil level.
MAX
MIN
MAX
MIN
MAX
MIN