EU Declaration of Conformity | 14
Instruction Manual MINK MM 1104-1142 BV ATEX_EN_en
39 | 40
14
EU Declaration of Conformity
This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This
Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating
company, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and
affix the CE-marking.
The manufacturer
Busch Produktions GmbH
Schauinslandstr. 1
DE-79689 Maulburg
declares that the machine: 'ATEX-Version' MINK MM 1104 BVE; MINK MM 1144 BVE; MINK MM 1102 BVE; MINK MM 1142 BVE
with a serial number from
DEM12201…
to
DEM12552…
fulfill(s) all the relevant provisions from EU directives:
– ‘Machinery’ 2006/42/EC
– ‘ATEX Directive’ 2014/34/EU, for use in potentially explosive areas according to classification written on the machine nameplate
– ‘Electromagnetic Compatibility’ (EMS) 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (incl. all related applicable
amendments)
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards
Title of the Standard
EN ISO 12100 : 2010
Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009
Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial
environments
EN ISO 80079-36 : 2016
(2)
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method
and requirements
EN ISO 80079-37 : 2016
(2)
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non electrical
type of protection constructional safety ‘c’, control of ignition source ‘b’, liquid immersion ‘k’
EN 1127-1 : 2019
(2)
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and
methodology
(2)
Only if an ATEX classification is written on the nameplate.
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU):
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Maulburg, 18.08.2021
Dr. Martin Gutmann
General Manager
Busch Produktions GmbH
