BUSCH LM 0180 A, Инструкции по модернизации

Страница: 6 / 20

5 | Storage
6 / 20 Installation and Retrofit Instructions DOLPHIN LM 0180-0270 A, LT 0170-0220
A_EN_en
5 Storage
NOTICE
Long storage time.
Risk of damage to the variable-frequency drive!
Due to a long storage time the capacitors of the variable-frequency drive can lose effi-
ciency because of electrochemical processes. In worst case it can lead to a short circuit
and therefore to a damage to the variable-frequency drive.
• Connect the variable-frequency drive every 2 years for 30 minutes to the mains.
• Store the motor with the variable-frequency drive indoor, dry, dust free and if possible
in the original packaging preferably at temperature between -20 … 60 °C.
6 Installation
DANGER
Carry out any work on the variable-frequency drive and motor.
Risk of electrical shock!
• Electrical installation work must only be executed by qualified personnel.
DANGER
The installation conditions are not respected.
Risk of electrical shock!
Risk of severe injury!
• Take care that the installation conditions are met.
CAUTION
The machine can start immediately when power is supplied.
Risk of inadvertent start-up!
• Make sure that a start-up will not lead to a dangerous situation.
6.1 Installation Conditions
• Make sure that the variable-frequency drive is de-energised.
• Make sure that the variable-frequency drive is grounded in accordance with DIN EN
61140; VDE 0140, NEC and other relevant standards.
• Make sure that unused open cable ends in the motor terminal box are insulated.
• Make sure that mains connections are hardwired.
• Make sure to use suitable line circuit breakers with the prescribed nominal current be-
tween the mains and the variable-frequency drive, see Line Protection [ ► 7] .
• Make sure that the ambient conditions are complied with, see Ambient Conditions
[ ► 7] .