Operating Instructions
Busch-Infoline
®
Installation and electrical
connection
Operating Instructions | 1473-1-8174
— 11 —
Pos: 35 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/M - O/Montage der Geräteeinsätze @ 25\mod_1341307010249_15.docx @ 220967 @ 2 @ 1
7.3
Mounting of device inserts
Pos: 36 /#Neustruktur#/Online-Dokumentation (+KNX)/Montage/Infoline/Montage - Geräte Einsätze 1510 @ 25\mod_1339653111462_15.docx @ 217416 @ @ 1
It should preferably be mounted next to the door of the WC.
1. Mount the devices in a flush-mounted box according to DIN 049073-1.
2. Fix the devices in the flush-mounted box with screws.
3. Bundle the wires of the mains cable (230 V) with the cable binders included in the scope of supply (Fig. 2: b).
4. Push the low-voltage lines through the insulating tube included in the scope of supply (Fig. 2: a).
5. Connect the terminal resistor to terminals 1 and 2 of the signal button insert that is installed furthest from the
alarm signal insert.
6. Mount the elements of the cover plate in the sequence shown in the illustration.
Fig. 2: 1518 U power supply insert
Fig. 3: 1520/1 UKZ cover plate for signal button insert with pullcord
Fig. 4: 1515 U-12 cover plate for alarm signal insert
Pos: 37 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1
