Busch-Jaeger Busch-AudioWorld 8215 U-101, Руководство по эксплуатации продукта

Страница: 37 / 99

Operation
Product manual 2CKA001473B5162 │ 37
8.2.9 Operating AUX
With the AUX function you play the music of the flush-mounted radio on an external device. E.g.
a HiFi system. The music of the external device can also be played on the flush-mounted radio.
■
For additional information about the AUX connection, see chapter 6.5.2 “AUX (Auxiliary)“ on
page 21.
■
For examples of device compilations for the use of AUX connection, see chapter 9 “Case
studies“ on page 80
■
Via an input gain the volume of played music can be matched to the other favourites, see
chapter 8.3.22 “Menu "Settings" – "AUX input gain"“ on page 65.
Hearing music on the flush-mounted radio
To play music of an external device on the flush-mounted radio, the following settings must
have been made:
■
The "AUX" mode of the flush-mounted radio must be set on "AUX input".
– For setting AUX mode, see chapter 8.3.21 “Menu "Settings" - "AUX"“ on page 64.
– The favourite "AUX" is only visible when the AUX connection has been set on "AUX
input" in the settings.
Fig. 24: Hearing music on the flush-mounted radio via AUX
Use the following steps to play music on the flush-mounted radio:
1. Switch the flush-mounted radio on.
– After the device is switched on, the favourite that was last listened to is displayed.
2. Press button "ENTER" [3] as often as required until you have changed to the "AUX"
favourite.
– The current favourite number [1] is shown at the top right-hand in the display.
– Favourite "AUX" is the last of the stored favourites.
– After the change to the "AUX" favourites, the AUX function is active. The AUX icon [2] is
displayed.
3. Switch on the external device.
– The operation of the external device depends on the respective device.
– The audio channel of the external device is played on the flush-mounted radio.