18
Operating guidelines
16. Phonebook
Press and release the button for the voice control shortly and use the
voice command
`PHONEBOOK
´.
Since your phonebook is scanned with the first coupling of your mobile
phone with the system, it is immediately available to you and is stored
until you delete the mobile phone from the list (see chapter:
Blue-
tooth
®
). The telephone book data can of course only be seen or chan-
ged by you.
After the first entry has automatically been read aloud, in addition to
the standard commands the following voice commands are available:
The marked entry is read aloud again.
The entire list is read aloud to you. With
`STOP
´ you can stop the
process and select the respective entry. With
`NEXT
´
or
`NEXT
PAGE
´
and
`PREVIOUS
´
or
`PREVIOUS PAGE
´
you can navigate in
the list.
With
`DIAL
´ the telephone connection will be made. You can also
jump directly to one of the entries shown by activating the entry
number. E.g.:
`SELECT ENTRY THREE
´.
`Joe Bloggs´ is a placeholder for an entry from your phonebook. If you
select a name, you go directly to the respective entry.
Note:
It is important that the stated name exactly corresponds
with the recorded entry in the phonebook.
Please note that telephone book entries, which are only
shown in capital letters must be spelt out.
Depending on the type of mobile phone, it is possible that
the order of the first names and surnames may have swap-
ped around after the telephone book has been transferred.
Here you can search for entries through a letter field. Name a begin-
ning letter and with the voice command
`SELECT
´ all entries are
shown which begin with the respective letter.
Phonebook
Playback
Play list
Dial Joe Bloggs
Dial fast search
Select