3 = code will NOT be displayed on the screen. A beep WILL NOT
sound
when you press each key
4 = code WILL be displayed when types AND when the safe is opened/
closed. A beep WILL NOT sound when you press each key
Digit 2 - The length of your code
3 = 3 digits
4 = 4 digits
5 = 5 digits
6 = 6 digits
Digit 3 - Penalty Time length
0 = there will be no penalty lockout time (not recommended)
1 = After 4 incorrect entries there is a penalty time of 15 minutes
2 = After 4 incorrect entries there is a penalty time of 30 minutes
Keypad setup
Now you have chosen your settings you can set up the keypad
• Enter a valid 3-6 digit user code and open the safe
• Press the [CLEAR] key twice, the screen will display ‘PROG’
• Enter the code ‘751019’
• The screen will display the current setup, enter the 3 digits you have
chosen from the setup list i.e. [0][4][1] followed by the digits ‘300’
• Press the [LOCK] key
• The screen will now display ‘EEEEEE’ enter the date in the format
DD MM YY followed by the [LOCK] key
• The screen will now display ‘EEEEEE’ enter the time in the format
HH MM SS followed by the [LOCK] key
• Enter your user code followed by the [LOCK] key, the keypad is now
set up
NOTE: If you change the code length setting, after entering the date and time, follow the
‘CHANGE USER CODE’ settings from ‘Press the [CLEAR] key twice’ before you
complete the last step of setup.
Current supply / Battery change
• With the safe closed press the [LOCK] key
• If screen shows ‘bA-HI’ the batteries are fine
• If screen shows ‘bA-LO’ the batteries are low and need changing
• Open the safe and the battery compartment to change the batteries.
Burton Safes recommend the Duracell brand.
