USER INSTRUCTIONS - PRIMO HOME SAFE
How to open the safe
ABOUT THE LOCK
This lock requires a 3-6 digit code to open the
lock. The safe also comes with an emergency
override key. The key hole is located next to the
keypad.
The lock can also have a master code
programmed in case the emergency key is
missing. The master code can only open the lock.
• Enter a valid 3-6 digit user code (the factory default user code is ‘1234’)
• Press the [LOCK] key
• The screen will display ‘OPEN’
• Open the safe door
Incorrect Entry
• If an incorrect code has been entered the screen will display ‘ERROR’
• After 4 incorrect entries, a penalty time of 15 minutes (factory default)
or 30 minutes (if you have chosen this setup) will begin.
• The screen will display ‘HOLD15’ or ‘HOLD30’. Pressing any key will
show how long is remaining
• When the penalty time is over, try again
NOTE: you can change the penalty time in the keypad setup menu
How to close the safe
• Ensure that nothing is in the way of the bolts
• Close the door fully and press the [LOCK] key
• The screen will display [CLOSED]
Version 1
April 2018
