Burstner Ixeo Time IT 590, Инструкция по эксплуатации

Страница: 133 / 274

133
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
Electrical system
8
The vehicle can be connected to an external 230 V power supply.
Connecting the vehicle:
„
Check whether the power supply device is suitable regarding connection,
voltage, frequency and current.
„
Check whether the cables and connections are suitable.
„
Check the plug connectors and cables for visible damage.
„
Switch off the safety cut-out (Fig. 169,2 and 4) in the fuse box (Fig. 169,3).
„
Open the seal (Fig. 170,2) of the cable feedthrough.
„
Guide the cable through the cable feedthrough into the vehicle.
„
Plug the plug connector into the 230 V connection (Fig. 170,1) of the
vehicle.
„
Close the service flap.
„
Plug the connector of the connecting cable into the socket of the power
supply device. Ensure that the detent of the spring-mounted pivoting cover
is engaged in position.
„
Switch on the safety cut-out in the fuse box.
Checking the fault current
protection switch:
„
When the vehicle is connected to the 230 V supply, press the test button
(Fig. 169,1) of the combined fault current protection switch / safety cut-out
(Fig. 169,4) in the fuse box (Fig. 169,3). The fault current protection switch
must trip.
„
Switch the fault current protection switch back on again.
Unplugging the connection:
„
Switch off the safety cut-outs (Fig. 169,2 and 4) in the fuse box (Fig. 169,3).
„
Loosen the detent on the power supply device and unplug the connection
cable from the socket.
„
Open the service flap.
Fig. 169 230 V fuse box
1 Test button
2 Safety cut-out
3 Fuse box
4 Combined fault current protection
switch / safety cut-out
Fig. 170 230 V connection on vehicle