Burstner Ixeo Time IT 590, Инструкция по эксплуатации

Страница: 106 / 274

106
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
Living
6
„
Fully unfold the support underneath the additional cushion with reinforce-
ment plate.
„
Hook the hooks on the additional cushion with reinforcement plate into the
holders on the bench seat and place the support on the floor.
6.15.6 Conversion L-seating group into transverse bed (Ixeo IT 734)
„
Convert the lift-off table to a bed foundation (see section 6.13).
„
Push the cover of the lateral bench towards the centre of the vehicle as far
as it will go.
„
Place the additional cushion horizontally onto the table (see Fig. 147).
„
Place the back cushion of the individual bench horizontally onto the table.
„
Fully unfold the support underneath the additional cushion with reinforce-
ment plate.
„
Hook the hooks on the additional cushion with reinforcement plate into the
holders on the bench seat and place the support on the floor.
6.15.7 Conversion semi-dinette into transverse bed (with
additional cushion table and bed widening)
„
Convert the suspension table into a bed foundation (see section 6.13).
„
Remove the back cushion of the bench and lay it aside.
„
Push the cover of the lateral seat towards the centre of the vehicle as far
as it will go.
„
Place the back cushion of the lateral seat on the table.
„
Place the rectangular additional cushion on the table (between the seat
cushion and the back cushion of the lateral seat, see Fig. 149).
Fig. 146 Prior to conversion Fig. 147 After conversion
Fig. 148 Prior to conversion Fig. 149 After conversion