Burstner CityCar 2016, Инструкция по эксплуатации

Страница: 58 / 150

58
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Living
6
6.11.2 Additional bed (conversion of the seating group)
„
Fold down the folding worktop.
„
Convert the suspension table into a bed foundation (see section 6.9.1).
„
Place the small additional cushion onto the table in front of the seat cushion
of the bench (refer to Fig. 32).
„
Insert the journals on the bottom side of the cushion support into the
recesses on the bench. In order to do this, lift the seat cushion slightly.
„
Fold out the support legs of the cushion support. Put the cushion support
down on the support legs.
„
Place large additional cushion on the cushion support (refer to Fig. 34).
Z
Depending on the equipment, the seating group can be converted into a
further sleeping place.
Fig. 31 Prior to conversion Fig. 32 Conversion (1)
Fig. 33 Conversion (2) Fig. 34 After conversion