6
find that the sound continues to improve over the first several weeks of operation. If the power is
disconnected for a period of an hour or more, the unit will undergo similar but less dramatic break-in.
Powering up
Make sure volume control has been turned to minimal when using your Conductor SL for the first time.
Always power up your source machine first and your power amp last. When powering down your
system reverse the steps.
Tips
•
Connect your Conductor SL directly to the wall socket with a good quality power cable
Instead of channel thought a power board will yield better result.
•
Warm up your Conductor SL for 30 min is recommenced before each listening section.
•
It is recommended to apply contact clearing product such as Deoxit ProGold Contact Cleaner
to all input and output connectors every 6 months.
Free Warranty Extension
All Burson Audio products are covered by 12 months of warranty (See conditions below). You can
extend the warranty to 24 months by sending a photo of your audio system with the inclusion of the
Burson product to
(it would be much appreciated if you can share your
Burson experience with us) with the date of your purchase and the name of authorized dealer.
Warranty Conditions
Burson Audio warrants that this product shall be free from defects in materials and workmanship for:
1 year for all parts of the product. The warranty period begins at the date of sale and is subject to
the following requirements and understandings:
1.
This is a non transferable warranty.
2.
The product must not have been modified in any manner whatsoever, or the warranty is
immediately voided.
3.
The product must not have been stored in a humid, damp environment; nor subjected to
weather, water, or salt spray.
4.
During the warranty period Burson will replace a defective Burson Conductor SL with a
similar available product, at no cost to the owner for labor, materials, and shipping charges
from Burson.
5.
Burson shall not, under any circumstances, be liable for any incidental or consequential
damages arising from the loss of property or other damage or losses due to the failure of a
Burson product. Burson will not pay for loss of use or inconvenience caused by the failure of
a Burson product. Burson will not pay for damage caused to other audio components caused
by the failure of the Burson product within the limits allowed by Australian Law.
6.
The customer is responsible for the shipping charges for all repairs, warranty or non-
warranty, shipped to Burson. Burson will pay return shipping to the customer or dealer
