5
Connections
This section provides instructions to connect the Burson AB160 to the rest of your music system. Below is an illustration
of the Burson AB160 rear panel, showing all inputs and outputs.
Avoid allowing static shocks to be applied to the inputs or outputs. To prevent static shocks, touch any grounded
surface, such as the chassis of a component that is plugged into an AC socket, before connecting or removing a cable.
Inputs and outputs can be safely connected to the Burson AB160 when the AC power is switched off.
Connecting to AC Power
Check to make sure your Burson AB160 has been manufactured for operation at your AC line voltage. Attempting to use
your Burson AB160 at any voltage other than specified on the rear of the unit may cause damage that is not covered by
Burson’s warranty.
IEC Intake &
Power switch
RCA Output
Input A & B
120 / 240V AC
selection
Input A & B
