SmartSource Advantage
User's Manual 19
Maintenance
The separation roller assembly and the feed roller assembly in your scanner are designed
to make document feeding smooth. After usage for a period of time, the separation roller
assembly and feed roller assembly may become worn, and a problem such as document
double-feed may occur. In this case, check either the separation roller assembly or the feed
roller assembly, and replace them if needed. Follow the procedure below for replacement
of the separation roller assembly and feed roller assembly.
Replacing the Separation Roller Assembly
1. Open the scanner cover. Locate the separation roller assembly at the top of the inner
side of the scanner cover.
2. Push down and then pull the cover lever to open the roller cover first. Hold both sides
of the rollers to pull out the separation roller assembly from its compartment.
Roller cover
Separation roller assembly
Scanner cover
Separation roller assembly