Mounting the Scope
We recommend using high-quality rings and bases,
like Burris Zee Rings or Signature Rings. Quality
components ensure that your scope will remain safely
and securely mounted, and will provide the maximum
accuracy. Use care when mounting your scope as
damage caused by improper mounting is not covered
by the Burris Forever Warranty.
Anti-Reflection Device (ARD)
Predator Quest riflescopes come with an anti-reflection
device. The honeycomb construction reduces lens
glare, and provides greater concealment to prevent
detection. The ARD easily installs onto the front
objective tube. Simply insert the threaded end into
the front objective tube; turn clockwise until the ARD
is snug. Be careful not to over-tighten.
Care & Maintenance
Predator Quest riflescopes are fully waterproof and
fogproof. In the event that the lenses are subjected to
dust, dirt or mud, follow these steps to clean and
protect the lens surface. Failure to remove grit before
final cleaning is sure to damage lens coatings.
Coarse dirt/debris must be removed from the lens
surface. The most convenient way to clean a lens
surface is to use a Lens Pen. Position the scope so
particles will fall away from the lens, and then use the
Lens Pen or soft brush to gently whisk away the debris
while blowing on the lens to dislodge the particles. For
heavy dirt, like dried mud, use a spray of clean water or
lens cleaning fluid to remove the dirt.
Your Predator Quest riflescope will provide a reliable
performance given reasonable care and treatment.
All moving assemblies are permanently lubricated.
Only occasional cleaning of the outside of the scope
and the exterior lenses is required. Never disassemble
your scope. Disassembly by anyone other than our
factory will void the warranty. If you have any other
problems with your riflescope, return it to the Burris
factory for repair.
3
