4= 5.0
™
1= 1.0 4= 5.0
2= 2.2 5= 6.5
3= 3.5 6= 8.5
5.56X45 NATO 55GR FMJ
3200FPS 2000FT
The C4 Plus custom knobs eliminate the guesswork for
holdover. Just dial in the known distance and use the
customized MOA WindMap to determine the hold-off
for a 10 MPH wind. In the example above, at 400 yards
you simply hold 2.9 tick marks into a 10 MPH wind for
pinpoint accuracy.
Note:
It is important that you provide Burris with the most accurate
load and environmental information as possible when requesting your
free Custom Clicker. Burris warrants that each Custom Clicker will be
calibrated mathematically correct for the data you provide. Burris is
not responsible for any inaccuracy to the actual trajectory realized by
velocity, ballistic coefficient, or environmental variances in field conditions
compared to the data provided by you or an ammo/bullet manufacturer
for preparing a Custom Clicker.
How to Receive Your Free Custom Clicker
1. Determine precisely the load you will shoot - either a
factory load or handload.
2. If choosing a factory load and if you have access
to a chronograph, measure the actual velocity of the
factory load. If you do not have access to a chronograph
and/or do not provide a muzzle velocity to us, we
will use the advertised velocity for your factory load.
3. If choosing a handload, either obtain the actual
muzzle velocity or estimate the muzzle velocity
based on your reloading manual(s).
2
AR user guide_Layout 1 11/18/13 10:49 AM Page 3
