Burntech Wood Fired Outdoor Oven Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 12

Burntech Wood Fired Outdoor Oven Скачать руководство пользователя страница 2

2

General Information

The

Burntech

Wood Fired Oven is a

prefabricated, refractory modular wood fired oven
designed for field assembly. The system consists of
interlocking precast components which are adhered
together with masonry mortar.

It includes all the parts necessary for assembly of a
complete Wood Fired Oven.

Each

Burntech

precast component is designed for a

specific part of the oven such that only one means for
assembly is possible.

The various

Burntech

Wood Fired Oven components

will be described and illustrated in the following pages.
Close attention should be paid to each component
group’s specifications and installation requirements as
described in this manual.

Important:

Due to the heat and weight issues, the

Burntech

Wood Fired Oven, Table Top version installation

requires a non-combustible base with no wood
underpinnings, prepare custom base to handle the

Burntech

Oven 684 lbs. with optional base support weight

580 lbs. for a total of 1264 lbs.

STANDARD

TABLE TOP

STANDARD

TABLE TOP VERSION

SHOWN WITH WOOD

STORAGE BASE

(SOLD SEPARATELY)

BURNTECH OVEN WITH BASE (SOLD SEPARATELY)

«
1
2
3
4
...
»

Содержание Wood Fired Outdoor Oven













Отзывы:

Нет отзывов