ASSEMBLY INSTRUCTIONS
GRAND + BENEDICTS
| 800.547.7005 | www.grand-benedicts.com
UPRIGHT
Please note that wall mounting screws
are not included and it’s the responsibil-
ity of the installer to select appropriate
hardware. For accuracy and efficiency, we
recommend that you use a Laser Leveler
and professional installers for this job.
STEP 1:
Before you start, determine what
height you need to mount the wall mount-
ing brackets. The uprights are supposed
to be resting on the floor (not floating).
The levelers have a few inches of play and
can be used to even out an uneven floor.
STEP 2:
Measure the wall and establish
a starting point and two horizontal, level
lines. Mark the the lines 24” on center.
STEP 3
:
Mount the two wall brackets for
the first upright on a vertically level line
78” on center.
STEP 4
:
Attach the upright to the wall
brackets with the screws provided. Adjust
levelers as needed.
STEP 5:
Mount the second set of wall
brackets 24” on center and attach upright.
Before moving on, use a Burnside shelf
or a hangbar to test and ensure correct
spacing.
SCREWS X 4
11.5”
24” ON CENTER
OR 48” ON CENTER
24” ON CENTER
OR 48” ON CENTER
NOTE: CAN USE HANGBARS 292-HB24-1-5
OR 292-HB48-1-5 AS SPACER
LEVELER
78” ON CENTER
(
78”on center is from bottom hole to bottom hole
)
WALL BRACKETS X2
(
can be turned vertical or horizontal
)
(11.5” from bottom of upright to
center of bottom bracket hole)
