BURNiT Pell 150, Инструкция по установке и эксплуатации

Страница: 25 / 36

25
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
the button to open the next page of
the menu.
In this submenu you
can adjust the
parameters of the
lowest output
mode
of operation of the
burner. It is indicated by one flame .
We recommend to set at 10÷35% of the
main mode.
You can modify the pellet quantity (Feed)
and fan output as a percentage value
(FAN) .
Select the desired option using the
navigation arrows. Use the „ Enter ”
button to open the next parameter. Use
the
button to open the next page of
the menu.
Complete description of the output
modes is provided in section 10 of this
manual.
9.3.7. Suspend
This submenu allows you to adjust the
parameters of the suspended mode of
operation of the burner. You can modify
the pellet quantity ( Feed ) and fan output
as a percentage value ( FAN ).
Select the desired
option using the
navigation arrows.
Use the „ Enter ”
button to open the next parameter. Use
the
button to open the next page of
the menu.
9.3.8. Suspend Time
In this menu you
can adjust the time
period for which
the burner will
remain in
suspended mode and the time can be set
in minutes with a maximum duration of
180 minutes.
If within a set time ( 20 minutes)
the temperature in the boiler does
not decrease, the burner enters into
Extinguish mode – crossed-out flame .
9.3.9. Cleaning set up in working mode
In menu Interm.
Cleaing self-
cleaning for the
burner can be set.
The main burner's
fan turns on during certain cycle on
higher power level for certain period of
time. All parameters can be changed.
NOTE! This menu is valid only for
pellet burners with model “ECO”
9.4. Auto Clean Setup
You can set time
and number of
engagements of
the burner self-
cleaning system.
It is mandatory to have at least one self-
cleaning session in
24 hours
.
Maximum number of self-cleaning
sessions in 24 hours – six.
Select the desired option using the
navigation arrows. Use the „ Enter ”
button to open the next parameter. Use
the
button to open the next page of
the menu.