BURNHARD Big Fred Deluxe, Руководство пользователя

Страница: 51 / 60

51
LEAK TEST
• Use a commercially available leak detection spray or paint brush and soapy water to check all connec-
tions (mixing ratio of soap to water: 1:3).
• Open the gas cylinder valve. Small bubbles will appear where there are leaks.
• Close the valve again.
• Tighten the nuts on both sides by hand again and repeat the leak test. If you still notice bubbles, close
the gas valve and consult a specialist dealer.
Repeat the leak test every time you change the gas cylinder.
ENERGY SAVING TIPS
1. Turn the grill off as soon as you are done grilling.
2. Preheat the grill with the lid closed for only 10-15 minutes (except for the first use).
3. You do not need to preheat the grill longer than specified.
WARNING: Check the gas connections for breakages, wear, or tear before use. Should you notice
any of these, do not use the grill until the issue has been resolved.
When replacing or unscrewing the gas cylinder, make sure there are no fire sources such as candles, electri-
cal appliances, or cigarettes within reach. Always check to ensure the cylinder is properly closed.