11
Activating the
programming mode
Arranging a
program
Saving a
program
Playback of the
program
Selecting a defined
program space
Programming a
track
Deleting a
program
To start the program function press the key
PROGR.
of the remote control. The
alphanumeric display will show
PROGRAM
shortly and then starts the programming mode.
The display shows now
P: 01 T: 00
whereby
P
stands for program space,
T
stands for the
track wich should be programmed on this program space.
The selection of a track will be done with the arrow key
▲
for the following tracks and
▼
for
the previous tracks. Press the key
OK
of the remote control, if you got the desired track.
This track will be saved on the selected program space. The display shows then
SAVED
to
confirm the programming. Afterwards the following program space will be activated for
programming.
To save your favourite track program and leave the programming mode press the key
PROGR.
of the remote control.
If your programming is unvalid, because the content of all programm spaces is 00 for
example, the
PROGRAM LED (9)
remains dark.
If your programming is valid, the
PROGRAM LED (9)
will light up.
When you have left the programming mode and the
PROGRAM LED (9)
is on, you can start
your favourit track selection by pressing the key
PLAY/PAUSE
.
Press the key
◄
of the remote control. In front of the program space number an arrow
→
shows you that you can select a program space. The selection will be done with the arrow
key
▲
for the following program spaces and
▼
for the previous tracks.
Press the key
► of the remote control. In front of the track number an arrow
→
shows that
you can choose a track for the selected program space. The selection of a track will be
done with the arrow key
▲
for the following tracks and
▼
for the previous tracks Press the
key
OK
of the remote control, if you got the desired track. This track will be saved on the
selected program space. The display shows then
SAVED
to confirm the programming.
Afterwards the following program space will be activated for programming.
A programmed track selection can be deleted by pressing of the key
CLEAR
of the remote
control or by opening the sliding cover. If the program is cleared, the
PROGRAM LED (9)
turns dark.
If you wanted to delete a program out while beeing in the programming mode, you must also
press the key
CLEAR
. Afterwards the display shows
CLEAR?
. If you want to delete the
program realy, you have to press the key
OK
.
PROGRAMMING A FAVOURITE TRACK SELECTION OF A CD
A total of 50 tracks from a CD can be programmed for playback in a selected order. Programming can only be done
using the remote control. The program plays the tracks in the selected order.
