1. GETTING STARTED
1.1 Register
Please register all serial numbers for your
B80 MOTHERSHIP
chassis, all
Daughter Cards
,
and
BP-300
.
You
must
register to activate your warranty! Please visit:
www.burlaudio.com/register
.
1.2 Remove Lid
1.
Remove 9 screws on top and 2 on each side (
Image 1
).
2.
Push lid up to remove from empty card slot (
Image 2
).
1.3 Check Jumper Settings On BMB3
1.
Find
H8
on the
BMB3
Motherboard
, as shown in
Image 3
.
2.
Make sure jumpers are set on Jumpers 1 and 8.
3.
Jumper positions 1 determines input mapping (
BAD4
,
BAD8
).
4.
Jumper positions 2, 3, 4, 5, 6 and 7 are NULL, default for
B16.
5.
Jumper position 8 determines use for
B16
or
B80
chassis.
Image 3:
Locate the
H6 Header
on
BMB3 Motherboard
. From the rear of the
chassis,
BMB3
is on the left.
The
H8 Header
is highlighted.
For
B16
, make sure jumpers are set on 1
and 8.
Image 2:
Push lid up.
Image 1:
Top view shows location of 4
screws on side before removing the lid.
1
CHAPTER 1
