Bürkert eCONTROL 8611, Быстрый старт, Страница: 39 / 142

39
ConfigurationLevel
FILT
PARA KP1
KP2 *
)
TREG *
)
KP_T *
)
INV
TN *
)
TN_T
* )
ZERO
DEAD
DE_T *
)
STRT *
)
BACK
YES
YES
NO
NO
*
)
The display depends on the control variable set in the MODE menu (see Fig. 15)
Enter filter factor ( 2 - 20)
Zero point shut-off (if default < 2 % of the set-point value range). Display only for INV = NO
Selection of
controller parameters
KP1 , Pproportional coefficient 1
KP2 , proportional coefficient 2
Cycle time for controller [s] (display only for MODE = PVC , 3P – T , 2P – T ,)
Reset time [s] (display only for MODE = SCV , 0 – 10, 4 – 20 , 2P – T , 3P – T ,)
Dead zone absolute. Unit and display of decimal place analogous to UNIT .
Proportional coefficient for cascaded temperature control (display only for MODE = T + F )
Reset time in [s] for cascaded temperature control (display only for MODE = T + F )
Dead zone absolute for cascaded temperature control (display only for MODE = T + F ).
Definition of start value for manipulated variable
(display only for
MODE = SCV, 0 – 10, 4 – 20, 1P – T, 3P – T )
Effective direction
Not inverted or direct control
Inverted control
Zero point shut-off is deactivated
Zero point shut-off is activated
B_IN
Fig. 21: Operating structure of the configuration level - 7 of 12
Definition of start value for manipulated variable (display only for MODE =
SCV, 0 – 10, 4 – 20 )
english
Type 8611